
The quick answer · A different reference surface
Radial ice measures outward from a wire or branch
NWS defines radial ice as the thickness of new ice on an exposed cylindrical object. Forecasts and Local Storm Reports now express that amount in hundredths of an inch, with forecasts available in six-hour periods through the National Digital Forecast Database.
Older NWS forecasts commonly described ice on an elevated, horizontal flat surface. Those two measurements are not equivalent. Official ASOS technical notes say uniform radial thickness is often about 37% to 40% of a planar estimate. A smaller-looking radial number can therefore describe a meaningful load on wires and branches; it is not evidence that the storm weakened.
Horizontal surfaces · Travel can turn hazardous first
Road glaze is not the same measurement as radial ice
Freezing rain is liquid precipitation that freezes on contact with a surface at or below freezing. A trace can create a slick coating on roads, sidewalks, decks, and steps even when the radial amount on branches remains small.
Do not use the radial forecast as a road-friction rating. Pavement temperature, treatment, traffic, shade, elevation, bridges, and recent precipitation all affect local travel. Read the point and hourly forecast, the complete alert text, and current road information from the responsible transportation agency.
Cylindrical surfaces · Infrastructure context
Radial ice better connects the forecast to wires and branches
Ice does not coat every side evenly. Gravity, wind, temperature, droplet size, and runoff can leave more ice on one side of an object. NWS measurement guidance averages the thickest and thinnest portions of the coating when an observer measures glaze on a branch or similar object.
The amount is still only one part of the impact. Wind can add stress to ice-loaded trees and lines, while tree species, remaining leaves, local maintenance, and exposure change what happens. Never stand beneath sagging limbs and never approach a downed line or anything touching it.
Reading the map · Label, period, probability
Three checks prevent a misleading comparison
- Find the measurement label. Confirm whether the product says radial ice, ice accretion, flat ice, or glaze. Some legacy local pages or archived graphics may describe the older flat-surface convention.
- Read the valid period. A six-hour amount is not automatically the storm total. Confirm the beginning, ending, and time zone on every frame.
- Separate the most-likely forecast from the range. NWS winter pages may show an official point forecast plus lower-to-higher possibilities. A probability of exceeding a threshold is not a promise that exact amount will occur.
Avoid converting the number yourself for a go-or-no-go decision. The relationship between flat and radial ice is an estimate, and a labeled official product already reflects the forecaster’s intended measurement. Use impacts and alert instructions, not a home-made conversion, to guide plans.
Different products · Different jobs
An ice amount is not an outlook, forecast, advisory, watch, or warning
- Observation
- A measured report for a place and time. A Local Storm Report can document observed radial ice but does not replace an active alert.
- Outlook
- Broader, earlier planning information that highlights possible winter-weather impacts. It is not a local warning or a final accumulation forecast.
- Forecast
- The expected ice amount, precipitation type, timing, and other conditions for a defined place and period. Forecasts can change as temperatures and storm track become clearer.
- Advisory
- Hazardous winter weather is expected, but the event is below local warning criteria. Small ice amounts can still make travel difficult or dangerous.
- Watch
- The risk of a significant winter event has increased, but occurrence, location, or timing remains uncertain. Prepare and keep checking updates.
- Warning
- Significant winter weather is expected or occurring. Follow the exact warning’s area, timing, hazards, and action statement.
Alert criteria vary by local NWS office and can account for more than one hazard. Do not assume that an old quarter-inch rule, a screenshot without a label, or an amount from another region tells you which product your office will issue.
A practical ice check · Before leaving or sleeping
Use the number as one layer in a five-part decision
- Open the official point forecast. Check precipitation type, temperature, timing, and whether a changeover is expected.
- Read the map legend and valid time. Confirm radial versus flat ice and whether the graphic is a most-likely amount, range, or exceedance probability.
- Open every active alert. Read the full area, onset, expiration, impacts, and official action statement.
- Check the surfaces you actually use. Bridges, steps, untreated parking lots, and shaded pavement may glaze before a larger infrastructure impact appears.
- Plan for both travel and outages. Charge devices, protect essential medication and food, and keep people and pets away from damaged trees and lines.
Refresh before departure. A forecast is not a guarantee, and an observation from one station does not certify an entire route.
Official sources reviewed November 15, 2026
Source notes
- NWS operational implementation notice for standardized radial ice measurements
- NWS service-change and public-information notice index
- NWS ASOS technical notes comparing planar and radial ice accretion
- NWS official winter forecast and probabilistic ice-product portal
- NWS winter watch, warning, and advisory guidance
- NWS winter precipitation-type explanation
- NWS glaze measurement and reporting guidance
- NWS Aberdeen historical ice photograph and credit
- NWS photograph reuse and credit guidance
MyUSA.us is an independent weather-information publisher and is not affiliated with NOAA or the National Weather Service. Official weather data and safety guidance remain available directly from the U.S. government sources linked above.
Page reviewed: November 15, 2026